Software Model Research Articles

Enhancing complex bioprocess learning through simulation technology and hybrid teaching: A case study in university education.

The utilization of computer simulators in university education is progressively being embraced to offer students a practical exposure to industrial bioprocesses. Bioreactor computer simulators hold various advantages over conventional laboratory experiments, such as cost-effectiveness and enhanced safety. The research objective is to assess the effectiveness of integrating bioreactor computer simulators into hybrid teaching to promote active and collaborative learning experiences and evaluate their impact on student participation and understanding. A hybrid strategy combining synchronous, face-to-face, and online teaching has been implemented to enhance the teaching-learning processes in the Industrial Bioprocesses course for Biochemistry students. The simulation software BIOSTAT®T Yeast was used. This software models the production of ethanol with Saccharomyces cerevisiae through batch cultivation and the determination of the kLa value of a bioreactor. In the first simulation activity, students analyzed the software response based on parameter values input by the instructor, while in the second simulation activity, students autonomously used the computer simulator under the primary oversight of the instructor. The survey results indicate that the pedagogical innovation was positively received and significantly motivating for the students. Comparing student satisfaction surveys between the two simulation activities suggests that fostering student autonomy and engagement through simulation technology can improve satisfaction and learning outcomes in bioprocess education.

Presenting the AI models in predicting the settlement of earth dams using the results of spatiotemporal clustering and k-means algorithm

In this work, the results of instrumentation over 8 years, including the phases of construction, first impounding, and operation, have been used to analyze the location of the Eyvashan Dam settlement. Mohr–Coulomb behavioral model and numerical model of Plaxis 2D software were used to verify the monitoring results. The results demonstrated that settlement of the dam has increased in the dam's core since the beginning of construction, and they eventually stabilized during the operation phase. After the completion of the construction phase, the maximum settlement of the dam core was recorded as 809 mm, which is equivalent to 1.2% of the height of the dam at the middle level. Also, an approach to interpreting the settlement behavior of earth dams has been presented that is based on spatiotemporal clustering. Also, RF, MARS, and GMDH models were created based on a proposed scenario to predict settlement using points located in a cluster. Therefore, the settlement location of the studied dam was determined using the results of the k-means clustering algorithm in the aforementioned AI models. The high accuracy of the results of the proposed method confirms the proper performance of using AI models in predicting and diagnosing the settlement of earthen dams using the results of k-means spatiotemporal clustering algorithm. The evaluation of the models shows that the ENN model is a more suitable and efficient tool in this field and can be useful in monitoring the settlement of earth dams.

Generalized Formal Model-Verifier: A Formal Approach for Verifying Static Models

The field of software modeling has gained significant popularity in the last decades. By capturing the static aspects of the software requirements, model-driven engineering eases the development and maintenance of software. However, additional constraints, such as invariants on model elements, that the solution must conform to may be too complex to include in the structure of the model itself. External solutions are often used to describe static constraints on models, the most prevalent approach being the Object Constraint Language (OCL) and its formal variants. This paper proposes the Generalized Formal Model-Verifier (GFMV), which is a general approach for verifying static constraints on software models. GFMV employs different formal verification methods based on Kripke Structures. Kripke Structures are used to capture the static structure of the model, then the constraints are formalized using a first-order branching-time logic, the Computational Tree Logic (CTL). Finally, the NuSMV model checker is reused to verify whether the constraints formalized in CTL hold on the formal Kripke Structure. When compared to existing solutions, GFMV offers increased generality and formal proof that the constraints hold on the model. The expressive power and runtime-scalability of the approach are evaluated on a real-world example model and OCL invariants cited from literature.

Fostering proactive work behavior: Where to start?

This study underscores the significance of assessing the capabilities of rehabilitation officers in navigating challenges, devising innovative work methods, and successfully executing the rehabilitation process. This is particularly crucial amid the dual challenges of overcapacity and the repercussions of the Covid-19 pandemic, making it an essential area for research. To be specific, it aims to obtain empirical evidence about the influence of proactive personality and supportive supervision on proactive work behavior, as well as the mediating role of Role Breadth Self-efficacy and Change Orientation. This research was conducted on all rehabilitation officers at the Narcotics Penitentiary in Sumatra, totaling 272 respondents. This study employs a quantitative method via a questionnaire using a purposive sampling technique. The data was subsequently examined using the Lisrel 8.70 software and Structural Equation Modeling (SEM). It can be concluded from the results that the rehabilitation officers for narcotics addicts at the Narcotics Penitentiary can create and improve proactive work behavior properly through the influence of proactive personality, supportive supervision, role breadth self-efficacy, and change orientation. The study may suggest new ways of working and generate new ideas to increase initiative, encourage feedback, and voice employee concerns. Furthermore, this research has the potential to pinpoint deficiencies in proactive work behavior, serving as a foundation for designing interventions or training programs. These initiatives aim to enhance the innovative and creative contributions of rehabilitation officers in the rehabilitation process.

A semi-automated software model to support AI ethics compliance assessment of an AI system guided by ethical principles of AI

AbstractCompliance with principles and guidelines for ethical AI has a significant impact on companies engaged in the development of artificial intelligence (AI) systems. Specifically, ethics is a broad concept that continuously evolves over time and across cultural and geographical boundaries. International organisations (IOs), individual states, and private groups, all have an interest in defining the concept of ethics of AI. IOs, as well as regional and national bodies, have issued many decisions on AI ethics. Developing a system that complies with the ethical framework poses a complex challenge for companies, and the consequences of not complying with ethical principles can have severe consequences, making compliance with these requirements a key issue for companies. Furthermore, there is a shortage of technical tools to ensure that such AI systems comply with ethical criteria. The scarcity of ethics compliance checking tools for AI, and the current focus on defining ethical guidelines for AI development, has led us to undertake a proposal consisting in a semi-automated software model to verify the ethical compliance of an AI system’s code. To implement this model, we focus on the following important aspects: (1) a literature review to identify existing ethical compliance systems, (2) a review of principles and guidelines for ethical AI to determine the international and European views regarding AI ethics, and (3) the identification of commonly accepted principles and sub-principles of AI. These elements served to inform (4) our proposal for the design of a semi-automated software for verifying the ethical compliance of AI systems both at design-time (ethics-by-design perspective) and afterwards on the resulting software.

Development of a New Vertical Dynamic Model of a Rail Vehicle for the Analysis of Ride Comfort

The rail vehicle industry wants to produce vehicles with higher speeds, to maintain and increase its market share. However, when the speed of the vehicle increases, it may have an undesirable effect on ride comfort, in terms of ride dynamics. Recent developments towards lighter and faster vehicles make the problem of ride comfort at higher speeds increasingly important. Focusing on the behavior of flexible rather than rigid body behavior should not be neglected when designing long and light car bodies. There are several approaches to incorporate body flexibility in multibody simulations and they have some superiorities and weaknesses. In this study, an efficient and accurate vertical dynamic model for the ride comfort analysis is developed and implemented in a commercial object-oriented modeling (OOM) software Dymola (2015 FD01) which uses the open-source code Modelica. This model includes car body flexibility with the assembling of a rigid body approach. The developed model is compared to a three-dimensional vehicle model in the commercial Vampire software (Pro V5.50) at different velocities. For the vertical ride comfort analysis, the ISO 2631-1 standard was used for both the developed model and the three-dimensional model. The results are presented as acceleration history and awrms—weighted r.m.s (root mean square) of accelerations—as required by the standard. The developed model has shown its feasibility in terms of its efficiency and accuracy for the vertical ride comfort analysis. The accuracy of the model is evidenced by the fact that the car body vibration level at high speeds shows minor differences compared to the results of the Vampire, which is a validated commercial software in the area of rail vehicle dynamics. The approach involving the assembly of rigid bodies is applied for the first time for high-speed trains in dynamical modelling, with flexible car bodies for ride comfort analysis. Furthermore, it can be used for parametrical studies focusing on ride comfort, thereby offering a quite beneficial framework for addressing the challenges of ride comfort analysis in high-speed rail vehicles. Improvements for and analyses of other aspects are also possible, since the optimization and other useful libraries are readily available in Dymola/Modelica.

Analysis of Land Use/Cover Characteristics and Dynamic of Changes in Huai River Basin from 2000 to 2020

Globally, land use is considered as one of the most closely related link between human being and nature. But land use/cover change (LULC) is regarded as the main cause for global environmental change with possible serious impact on human livelihoods and many parts of social and physical environmental aspects. Huai River Basin (HRB) is among the global river-land ecosystems that has been intensively altered by land use change. Unfortunately, the increasing land use change in HRB is not well scientifically addressed and still, related existing problems are not solved putting the basin ecological status and its basic grain production agricultural capacity at risks. This study adopted data image processing software and various mathematical statistical models to analyze the current LULC characteristics and dynamics of change in the study basin. From the analysis that adopted combined scientific techniques of CA-Markov, InVEST models with ArcGIS and IDRISI software, the results indicate that in 20 years of study, area of cultivated land in HRB declined by -4.34%, grassland declined by -21.28%, forest land declined by -3.22% and unused land declined by -18.84% while area of construction land increased by 26.38% and water area increased by 11.62%. Cultivated land was the major land use type in the basin while unused land was the minor land use type. Land use projection trend of HRB in 2035 predicts decline of areas coverage on cultivated land by -6.92%, on forestland by -9.20% and on grassland by -12.29%. But the basin is expected to have area increase on construction land by 30.07%, on water area by 15.03% and on unused land by 18.45%. Pictorial summary for the analysis of land use/cover characteristics and dynamic of changes in HRB is shown below.

Experimental and numerical analysis of the behavior of rehabilitated aluminum structures using chopped strand mat GFRP composite patches

PurposeThis paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.Design/methodology/approachSingle-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.FindingsThe width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.Originality/valueThis study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.Graphical abstract

3D printing of an artificial intelligence-generated patient-specific coronary artery segmentation in a support bath

Accurate segmentation of coronary artery tree and personalized 3D printing from medical images is essential for CAD diagnosis and treatment. The current literature on 3D printing relies solely on generic models created with different software or 3D coronary artery models manually segmented from medical images. Moreover, there are not many studies examining the bioprintability of a 3D model generated by artificial intelligence (AI) segmentation for complex and branched structures. In this study, deep learning algorithms with transfer learning have been employed for accurate segmentation of the coronary artery tree from medical images to generate printable segmentations. We propose a combination of deep learning and 3D printing, which accurately segments and prints complex vascular patterns in coronary arteries. Then, we performed the 3D printing of the AI-generated coronary artery segmentation for the fabrication of bifurcated hollow vascular structure. Our results indicate improved performance of segmentation with the aid of transfer learning with a Dice overlap score of 0.86 on a test set of 10 coronary tomography angiography images. Then, bifurcated regions from 3D models were printed into the Pluronic F-127 support bath using alginate + glucomannan hydrogel. We successfully fabricated the bifurcated coronary artery structures with high length and wall thickness accuracy, however, the outer diameters of the vessels and length of the bifurcation point differ from the 3D models. The extrusion of unnecessary material, primarily observed when the nozzle moves from left to the right vessel during 3D printing, can be mitigated by adjusting the nozzle speed. Moreover, the shape accuracy can also be improved by designing a multi-axis printhead that can change the printing angle in three dimensions. Thus, this study demonstrates the potential of the use of AI-segmented 3D models in the 3D printing of coronary artery structures and, when further improved, can be used for the fabrication of patient-specific vascular implants.

Seismic displacement analysis of slope reinforced by frame prestressed anchor rod structure

Instability of slope induced by earthquake seriously affects casualties and property losses and hinders earthquake rescue, so the study of slope displacement under earthquake is of great significance. For the slope reinforced by frame prestressed anchor rod structure under earthquake, the calculation method of slope displacement and axial force of anchor rod under seismic action were derived by combing Newmark method and limit analysis method. This method proposed in this paper comprehensively considers the amplification effect of earthquake acceleration on the slope surface, the inertial force of reinforce structure and the dynamic change of axial force of anchor rod. The solution program of this method was compiled in MATLAB and its rationality was proved by a numerical model in FLAC3D software. The results show the slope displacement calculated by the method proposed is consistent with the variation law of slope displacement obtained by traditional methods. Regardless of whether the anchoring force is considered or not, the slope yield acceleration obtained by this method is very close to the slope yield acceleration obtained by the Bishop method. The critical sliding surfaces obtained by the two methods are very close, and the sliding points are located at the foot of the slope. Compared with the Bishop method, this method can consider the amplification effect of seismic force on the free surface of the slope and the gravity of the supporting structure. Ignoring the change of the axial force of anchor rod will make the slope displacement larger, while not considering the amplification effect of the seismic acceleration on the slope surface and the gravity of the reinforce structure will make the slope displacement smaller. This method proposed in this paper comprehensively considers the above factors and is more accurate. In the process of landslide mass sliding, the axial force of the anchor rods increase gradually, and the growth rate of the axial force of the lower anchor rods are larger than that of the upper anchor rods. The increase of anchor rod prestress and elastic modulus will reduce the seismic displacement of the slope, and the increase of the dip angle of the anchor rod will increase the seismic displacement of the slope. The dip angle of the anchor rod should be minimized without affecting the grouting effect of the anchor rod.

Haematological and Serum Biochemical Responses of Yankasa Rams Supplemented Cinnamon Powder

This experiment was conducted to evaluate the effect of cinnamon supplements on Yankasa Rams' growth performance, nutrient digestibility, haematology and serum biochemical profile. A total number of sixteen (16) Yankasa grower rams with an average live weight of 20kg each was randomly allotted into four dietary treatments comprised of four replicates consisting of four animals per treatment in a completely randomized design (CRD), where data obtained in this study were analyzed using General Linear Model of Statistical Analysis Software and Means were separated using Duncan Multiple Range Test. The haematological variables demonstrated that packed cell volume was significantly (P<0.05) affected by an increased level of cinnamon Significant (P<0.05) differences were also recorded in white blood cells, neutrophils, basophils and haemoglobin while others were not significantly (P>0.05) changed. With the exception of plasma potassium level, there were no significant (P>0.05) differences in all other serum biochemistry with the supplementation of cinnamon. Cinnamon supplementation plays a vital role in improving the haematological profile. No significant considerable changes were observed in the serum biochemical profile as a result of cinnamon supplements in Yankasa rams. It is therefore recommended that cinnamon powder can be incorporated into ruminant animal diet up to 15g/kg without detrimental effect in animal health status. However further studies were encouraged.

Impact of Demographic Profile on Sustainability Learning: A Management Education Students’ Survey

PurposeThe specific objective of the research is to analyze the impact of academic level, year of study, age group and gender on cognitive learning, socio-emotional learning, behavioural learning and overall sustainability learning. MethodologyA sample of 389 management students were considered for the current study. The study incorporates multiple regression technique using SPSS software and structure equation modeling employing AMOS 26 software. For analyzing reliability Cronbach's alpha is used and further the construct validity is established via confirmatory factor analysis and for assessing discriminant validity Heterotrait-Monotrait ratio of correlations (HTMT) is employed. FindingsThe overall sustainability learning which has been calculated from the cognitive, socio-emotional and behavioural learning scores is found to be positively impacted by the demographic variables age group and is negatively impacted by the academic level. Practical implicationsThis study suggests that the educational programmes or initiatives must be specifically designed to induce sustainability learning based on gender and age-groups. Industry specific sustainability initiatives can be included in the curricula of professional educational programmes. Originality/valueThere is a dearth of studies in measuring the impact of age group, gender, level and year of study on attainment of sustainability learning objectives in terms of cognitive, socio-emotional, and behavioural learning on professional education students especially in India.

Research on the effect of water-cooling steel pipe on preventing spontaneous combustion of coal pile and its thermal migration behavior

During the storage and transportation process after mining, coal piles are placed in open environments, making them prone to self-heating and spontaneous combustion due to the nature of coal and factors like natural wind flow. In recent years, there have been frequent spontaneous combustion incidents involving coal piles, posing significant safety risks. To effectively prevent and control spontaneous combustion disasters in open-air coal storage piles, we propose a method involving the arrangement of water-cooling steel pipes within the coal piles. This method applies theories of coal spontaneous combustion mechanisms, porous media heat transfer, and non-isothermal pipeline heat transfer. The multi-physics coupling model of COMSOL numerical simulation software is used to analyze the spontaneous ignition process and prevention effect of open pit coal pile. In the model, the thin material transfer of porous media is taken as the oxygen concentration field, the heat transfer of porous media is taken as the temperature field, and the free and porous media flow is taken as the air seepage velocity field. The simulation results of the spontaneous combustion process in the coal pile indicate that the high-temperature zone of spontaneous combustion is situated within the range of 0.5 ~ 1.5 m inside the wind-facing surface and extends 0.5 m above the ground level. These findings serve as a basis for determining the optimal placement of water-cooling steel pipes within the coal pile. The simulation results of a single water-cooling steel pipe demonstrate a positive correlation between the cooling effect on the coal pile and the water cool flow, and a negative correlation with the water cool temperature. Additionally, the cooling radius of the water-cooling steel pipe is determined by the circumference of the pipe and remains unaffected by the water cool flow. Finally, simulations were conducted to evaluate the cooling effect of multiple rows of steel pipes, and optimal arrangement parameters were determined: a center distance between steel pipes of 1 m and a water cool flow rate of 1500 L/min. As a result, the onset of the self-heating period in the coal pile was delayed by 11 days, and the spontaneous combustion period was extended by 56 days. The arrangement of water-cooling steel pipes in the coal pile has demonstrated significant efficacy in preventing and controlling spontaneous combustion.

Experimental investigation of tungsten–nickel–iron alloy, W95Ni3.5Fe1.5, compared to copper monolithic bullets

Introduction:The demand for improved small arms ammunition has led to exploring advanced materials and manufacturing techniques. This research investigates the machining characteristics of CM and WNF alloy bullets, aiming to enhance ballistic performance and durability.Methods:Bullet profile-making trials were conducted to evaluate the impact of machining parameters such as cutting speed and feed. The study also considered variables including surface roughness, cutting temperature, and hardness, alongside a detailed morphological analysis, The evaluation utilized an orthogonal array and MCDM approach, incorporating the TOPSIS method for decision-making processes.Results:The findings reveal that WNF alloy bullets exhibit 3.01% to 27.95% lower machining temperatures, 24.88%-61.85% reduced surface roughness, and 19.45%-34% higher microhardness compared to CM bullets. Moreover, CM bullets demonstrated higher machining temperatures, resulting in 47.53% increased tool flank wear. WNF bullets showed a 24.89% reduction in crater wear and a 38.23% decrease in compressive residual stress in bullet profiles, indicating superior machining performance.Discussion:The superior machining performance of WNF alloy bullets suggests their potential to improve the ballistic performance and durability of small arms ammunition. The reduced tool wear and favorable machining parameters highlight WNF alloy's advantages for military and defense applications. A ballistic impact analysis using a finite element method (FEM) model in Abaqus software further supports the potential of WNF alloy bullets, providing a solid foundation for future advancements in bullet manufacturing technologies.

Effects of implementing non-nutritive sucking on oral feeding progression and outcomes in preterm infants: A systematic review and meta-analysis.

Preterm infants have imperfect neurological development, uncoordinated sucking-swallowing-breathing, which makes it difficult to realize effective oral feeding after birth. How to help preterm infants achieve complete oral feeding as soon as possible has become an important issue in the management of preterm infants. Non-nutritive sucking (NNS), as a useful oral stimulation, can improve the effect of oral feeding in preterm infants. This review aimed to explore the effect of NNS on oral feeding progression through a meta-analysis. We systematically searched PubMed, CINHAL, Web of Science, Embase, Cochrane databases, China's National Knowledge Infrastructure (CNKI), Wanfang and VIP database from inception to January 20, 2024. Search terms included 'non-nutritive sucking' 'oral feeding' and 'premature.' Eligibility criteria involved randomized controlled studies in English or Chinese. Studies were excluded if they were reviews, case reports, or observational studies from which valid data could not be extracted or outcome indicators were poorly defined. The meta-analysis will utilize Review Manager 5.3 software, employing either random-effects or fixed-effects models based on observed heterogeneity. We calculated the mean difference (MD) and 95% confidence interval (CI) for continuous data, and estimated pooled odds ratios (ORs) for dichotomous data. Sensitivity and publication bias analyses were conducted to ensure robust and reliable findings. We evaluated the methodological quality of randomized controlled trials (RCTs) utilizing the assessment tool provided by the Cochrane Collaboration. A total of 23 randomized controlled trials with 1461 preterm infants were included. The results of the meta-analysis showed that NNS significantly shortened time taken to achieve exclusive oral feeding (MD = -5.37,95%CI = -7.48 to-3.26, p<0.001), length of hospital stay(MD = -4.92, 95% CI = -6.76 to -3.09, p<0.001), time to start oral feeding(MD = -1.41, 95% CI = -2.36 to -0.45, p = 0.004), time to return to birth weight(MD = -1.72, 95% CI = -2.54 to -0.91, p<0.001). Compared to the NNS group, the control group had significant weight gain in preterm infants, including weight of discharge (MD = -61.10, 95% CI = -94.97 to -27.23, p = 0.0004), weight at full oral feeding (MD = -86.21, 95% CI = -134.37 to -38.05, p = 0.0005). In addition, NNS reduced the incidence of feeding intolerance (OR = 0.22, 95% CI = 0.14 to 0.35, p<0.001) in preterm infants. NNS improves oral feeding outcomes in preterm infants and reduces the time to reach full oral feeding and hospitalization length. However, this study was limited by the relatively small sample size of included studies and did not account for potential confounding factors. There was some heterogeneity and bias between studies. More studies are needed in the future to validate the effects on weight gain and growth in preterm infants. Nevertheless, our meta-analysis provides valuable insights, updating existing evidence on NNS for improving oral feeding in preterm infants and promoting evidence-based feeding practices in this population.

[Molecular study of an individual with Bel subtype due to a novel c.620T>C variant].

To explore the molecular basis for an individual with Bel subtype of the ABO blood type due to a novel c.620T>C variant gene, and assess its impact on the structure of GTB transferase. An individual who had visited the First Affiliated Hospital of Zhengzhou University on February 11, 2023 was selected as the study subject. ABO phenotyping was initially conducted with serological methods, which was followed by direct sequencing of 7 exons of the ABO gene. Subsequently, single-strand sequencing was carried out by using allele-specific primers, and the variant in the B transferase was homology-modeled using the Modeller software. The impact of the variant on the transferase's spatial structure was analyzed with the PyMOL software. The serological phenotype of the patient was identified as the Bel subtype. Direct sequencing revealed that she has harbored a novel c.620T>C variant, resulting in a p.Leu207Pro substitution in the polypeptide chain. Combined with single-strand sequencing, her genotype was ultimately determined as ABO*BELnew/ABO*O.01.02. Three-dimensional protein structure modeling showed that, compared with the wild type, the distance of one hydrogen bond between Proline and Glycine at position 272 has increased, along with disappearance of another hydrogen bond. The novel c.620T>C (p.Leu207Pro) variant of B allele may affect the structural stability of the glycosyltransferase. The weakened enzyme activity in turn may lead to reduced B antigen expression, manifesting as the Bel subtype by serological analysis.

Electronic Visualization Laboratory's 50th Anniversary Retrospective: Look to the Future, Build on the Past

Abstract September 2023 marks the 50th Anniversary of the Electronic Visualization Laboratory (EVL) at University of Illinois Chicago (UIC). EVL's introduction of the CAVE Automatic Virtual Environment in 1992, the first widely replicated, projection-based, walk-in, virtual-reality (VR) system in the world, put EVL at the forefront of collaborative, immersive data exploration and analytics. However, the journey did not begin then. Since its founding in 1973, EVL has been developing tools and techniques for real-time, interactive visualizations – pillars of VR. But EVL's culture is also relevant to its successes, as it has always been an interdisciplinary lab that fosters teamwork, where each person's expertise contributes to the development of the necessary tools, hardware, system software, applications, and human interface models to solve problems. Over the years, as multidisciplinary collaborations evolved and advanced scientific instruments and data resources were distributed globally, the need to access and share data and visualizations while working with colleagues, local and remote, synchronous and asynchronous, also became important fields of study. This paper is a retrospective of EVL's past 50 years that surveys the many networked, immersive, collaborative visualization and VR systems and applications it developed and deployed, lessons learned, and future plans.

Screening of cellulose-degrading bacteria and optimization of cellulase production from Bacillus cereus A49 through response surface methodology

Cellulose-degrading microorganisms hold immense significance in utilizing cellulose resources efficiently. The screening of natural cellulase bacteria and the optimization of fermentation conditions are the hot spots of research. This study meticulously screened cellulose-degrading bacteria from mixed soil samples adopting a multi-step approach, encompassing preliminary culture medium screening, Congo red medium-based re-screening, and quantification of cellulase activity across various strains. Particularly, three robust cellulase-producing strains were identified: A24 (MT740356.1 Brevibacillus borstelensis), A49 (MT740358.1 Bacillus cereus), and A61 (MT740357.1 Paenibacillus sp.). For subsequent cultivation experiments, the growth curves of the three obtained isolates were monitored diligently. Additionally, optimal CMCase production conditions were determined, keeping CMCase activity as a key metric, through a series of single-factor experiments: agitation speed, cultivation temperature, unit medium concentration, and inoculum volume. Maximum CMCase production was observed at 150 rpm/37 °C, doubling the unit medium addition, and a 5 mL inoculation volume. Further optimization was conducted using the selected isolate A49 employing response surface methodology. The software model recommended a 2.21fold unit medium addition, 36.11 °C temperature, and 4.91 mL inoculant volume for optimal CMCase production. Consequently, three parallel experiments were conducted based on predicted conditions consistently yielding an average CMCase production activity of 15.63 U/mL, closely aligning with the predicted value of 16.41 U/mL. These findings validated the reliability of the model and demonstrated the effectiveness of optimized CMCase production conditions for isolate A49.

Deep Learning Based Continuous Integration and Continuous Delivery Software Defect Prediction with Effective Optimization Strategy

Software defect prediction is one of the most difficult tasks in the IT sector. Continuous Integration and Continuous Delivery (CI/CD) software defect prediction is used in earlier stage, which consumes less amount of time. Various learning algorithms, such as convolutional neural networks and other machine learning algorithms (ML), are employed to forecast the flaws in the software model. In these existing algorithms, some issues are noticed, such as high computational complexity, excessive time consumption, the need for more energy to predict the model and a high-loss function. To address these issues, a novel deep learning (DL)-based CI/CD software defect prediction technique applying an effective optimization strategy is provided to improve the model's efficiency. The numerical data are collected from open source, and the obtained data is initially labeled based on time domain limitations. Initially, the Modified Synthetic Minority Over-Sampling Technique (M-SMOTE) mechanism is applied to balance the data to avoid overfitting problems, and data normalization is performed to rescale and normalize the data properly. After moralization, the optimal set of features is extracted from the data using Focal Bidirectional Encoder Representations from Transformers (F-BERT) to enhance the efficiency of the model. Finally, the software defects are predicted using Bidirectional Long Short-Term Memory (Bi-LSTM) integrated into the convolutional Gated recurrent units (GRU) model (Bi-CGRU) based on collected features. Hybrid Levy Rao (HLR) optimization is used to tune the hyperparameters properly in the classifier model. The proposed model's performance indicators are examined. The proposed model has a 95.32% accuracy, a 93.3% recall, a 94.98% Matthews correlation coefficient, and an F1-score of 91.355%. The proposed model generates less labeling noise and wait time than existing methods.

Seroprevalence of Hepatitis B and C Viruses and Their Associated Factors Among Military Personnel at Military Camps in Central Gondar, Ethiopia: A Cross-Sectional Study.

Globally, viral hepatitis is a leading cause of death and is highly prevalent in Ethiopia. Military personnel are more vulnerable to hepatitis B virus (HBV) and hepatitis C virus (HCV) infections, and there are no data on such populations in the study area. Therefore, this study aimed to determine the seroprevalence of HBV and HCV infections and their associated factors among military personnel in military camps in Central Gondar, Ethiopia. This institutional-based cross-sectional study was conducted with 277 military personnel from April to August 2022 at military camps in Central Gondar, Ethiopia. A systematic random sampling technique was used to select the study participants. Sociodemographic and other relevant data were collected using a structured questionnaire. Five milliliters of venous blood were collected using a vacutainer tube and tested for hepatitis B surface antigens and anti-hepatitis C virus antibodies using an enzyme-linked immunosorbent assay. Data were analyzed using STATA version 14 software and logistic regression models were used to determine the association between HBV/HCV infection and risk factors. Out of 277 participants, the overall seroprevalence of HBV and HCV infections was 19 (6.9%) and 9 (3.3%), respectively. The rate of HBV and HCV co-infection was 2 (0.7%). Having multiple sexual partners (p = 0.048), frequent alcohol use (p = 0.034), hospitalization (p = 0.014), and history of receiving injections from traditional practitioners (p = 0.040) were significant predictors of HBV infection. In contrast, a history of blood transfusion (p = 0.048) and sexually transmitted infections (p = 0.039) were significant risk factors for HCV infection. An intermediate prevalence of HBV and HCV infections was observed among the military personnel. Continuous screening, adherence to healthcare service guidelines, and strengthening of vaccination are crucial for preventing HBV and HCV infections.